SCIENTIFIC AND INDUSTRIAL TESTING AND RESEARCH CENTRE
Promoted by SIEMA & CODISSIA and Supported by COINDIA
 
 
 
BIS RECOGNITION
Si’Tarc Electrical Engineering Division , Mechanical Engineering Division and Chemistry Division are recognized by Bureau of Indian Standards as OUTSIDE RECOGNIZED LAB (Code No 6104904) for Testing of following Products.
 
S.No. Standard No. Specification
1.

  IS : 325-1996

Three Phase induction motors
2.

  IS : 996-1979

Single phase small AC and universal electric motors
3.

  IS : 2972(Part1)-1979

Textile motors
4.

  IS: 4692

Degrees of protection provided by enclosures for rotating electrical machinery
5.

  IS : 7538-1996

Three phase squirrel cage induction motors for centrifugal pumps for agricultural applications
6.
  IS : 8034-2002
Submersible pumpsets
7.

  IS : 8472-1998

Pumps -regenerative for cold water
8.
  IS : 8783 (Part 4/Sec1)-1995
Winding wires for submersible motor-Part 4 Specification for individual wires Sec 1 HR PVC insulated wires
9.
  IS : 8783 (Part 4/Sec2)-1995
Winding wires for submersible motor-Part 4 Specification for individual wires Sec 2 cross linked polyethylene insulated and polyamide jacketed wires
10.
  IS : 8783 (Part 4/Sec2)-1995
Winding wires for submersible motor-Part 4 Specification for individual wires Sec 3 Polyester and Poly Propylene winding wires
11.
  IS : 9079-2002
Electric monoset pumps for clear cold water for agricultural and water supply purposes
12.

  IS : 9283-1995

Motors for submersible pumpsets
13.
  IS : 12225-1997
Centrifugal jet pump
14.

  IS : 12615- 2004

Energy efficient induction motors –Three Phase squirrel cage
15.
  IS : 13730(Part 1)-1993
Polyvinyl Acetyl enameled round copper wire class 105
16.

  IS : 13730(Part 2)-1996

Solder able Polyurethane enameled Round copper wire
17.
  IS : 13730(Part 3)-1996
PARTICULAR TYPE OF WINDING WIRES
18.

  IS : 13730(Part 4)-1993

PARTICULAR TYPE OF WINDING WIRE - SOLDER ABLE POLYURETHANE ENAMELED ROUND COPPER WIRE
19.
  IS : 13730(Part 6)-1994
Oleo – Resinous enameled Round Aluminum Wire
20.

  IS : 13730(Part 7)-1993

Particular types of winding wires - polyimide enameled round copper wire
21.
  IS : 13730(Part 8)-1996
Particular types of winding wires - polyimide enameled round copper wire-class 180
22.

  IS : 13730(Part 9)-1994

Polyester enameled Round Aluminum Wire
23.
  IS : 13730(Part 13)-1993
Particular types of winding wires – Polyester over coated with polyimide mide enameled round copper wire- class 200
24.

  IS : 13730(Part 15)-1994

Polyesterimide enameled round aluminum wire
25.
  IS : 13730(Part 16)-1996
Polyester enameled rectangular copper wire
26.

  IS : 13730(Part 17)-1996

Polyvinyl Acetyl enameled rectangular copper wires
27.
  IS : 13730(Part 20)-1993
polyurethane enameled round copper wire
28.

  IS : 13730(Part 26)-1996

polyimide mide enameled round copper wire
29.
  IS : 13730(Part 27)-1996
Paper covered Rectangular Copper wire
30.

  IS : 13730(Part 28)-1996

polyesterimide enameled Rectangular Copper wire
31.
  IS : 13730(Part 29)-1996
Polyester or polyesterimide over coated with polyimide - mide enameled Rectangular Copper wire
32.

  IS : 13730(Part 31)-1997

Glass – fibre wound, Polyester or polyesterimide varnish – treated, Bare or En
33.
  IS : 13730(Part 32)-1997
Glass – fibre wound, Polyester or polyesterimide varnish – treated, Bare or enameled Rectangular Copper wire
34.

  IS : 13730(Part 33)-1997

Glass – fibre wound silicon varnish – treated, Bare or enameled Rectangular Copper wire, temperature
35.
  IS : 13730(Part 34)-1993
Particular types of winding wires - polyimide mide enameled round copper wire – class 130
36.

  IS : 13730(Part 39)-2005

Glass – fibre braided, , Polyester or polyesterimide varnish – treated, Bare or enameled Rectangular Copper wire, temperature
37.
  IS : 13730(Part 43)-2005
Aromatic polymide tape wrapped round copper wires
38.

  IS : 13730(Part 44)-2005

Aromatic polymide tape wrapped Rectangular Copper wire
39.
  IS : 13730(Part 45)-1999
Polyester enameled round copper wires
40.

  IS : 14220-1994

Open well submersible pumpsets
41.
  IS : 14582-1998
Single phase small a.c. electric motors for centrifugal pumps for agricultural applications
Performance test of the following Types of Pumps and Mechanical & Chemical Analysis of Material are Conducted
S.No. Types of Pumps Reference Indian Standards Measuring Range
1.
Monoset Pumps IS:9079 - 2002  
2.
Submersible Pumpsets IS:8034 - 2002  
3.
Open well Submersible Pumpsets IS:14220 - 1994 Pumps of capacity up to
4.
Centrifugal Regenerative Pumps IS:8472 - 1998 Flow:75 l/s
5.
Centrifugal Jet Pumps IS:12225 - 1997 Head:70 kg/Cm2
6.
Horizontal Centrifugal Pumps IS:6595(Pt.1&2) - 2002 Power:50 kW
7.
Self Priming Pumps IS:8418 - 1999 Current:100A
8.
Horizontal Centrifugal Monoset Pumps IS:9542 - 1980 Efficiency
9.
Foot value & Reflux Valves IS:10805 - 1986  
10.
Water Meter (Domestic type) IS:779 - 1994 & IS:6784 - 1996  
11.
Oil Pressure stove (Offset type) IS:10109 - 2002  
12.
Burner for Oil Pressure stove IS:8808 - 1996  
13.
Steel Plates for Pressure Vessels for Intermediate
and High Temperature Service Including Boilers – Specification.
IS 2002 : 1992  
14.
Steel Plate for Pressure Vessels used at Moderate and Low Temperature – Specification. (Except Grade3). IS 2041 : 1995  

15.

 

Galvanized Steel Sheets (Plain and Corrugated) – Specification IS 277 : 2003  
16.
Specification for High Strength Deformed Steel Bars and wires for Concrete Reinforcement. IS 1786 : 2008  
17.
Hot Rolled Low, Medium and High Tensile Structural Steel. IS 2062 : 2006  
18.
Specification for Plain Hard-Drawn Steel wire for Prestressed Concrete Pt.1 Cold Drawn Stress Relived Wire 1785 (Pt.1) : 1983  
19.
Specification for Plain Hard-Drawn Steel wire for Prestressed Concrete Pt.1 As Drawn IS 1785 (Pt.1) : 1983  
20.
Specification for Indented Wire for Prestressed Concrete. IS 6003 : 1983  
21.
Specification for Uncoated Stress Relived Stand for Prestressed Concrete. IS 6006 : 1983  
22.
Uncoated Stress Relived Low Relaxation Seven-ply Stand for Prestressed Concrete – Specification. IS 14268 : 1995  
23.
Carbon Steel Cast Billet Ingots, Billets, Blooms and Slabs for Re-rolling into Steel for General Structural Purposes – Specification. IS 2830 : 1992  
24.
Carbon Steel Cast Billet Ingots, Billets, Blooms and Slabs for Re-rolling into Steel for General Structural Purposes – Specification. IS 2831 : 2001